Restaurant retro counters

Restaurant Retro counters for bars and inns

When ordering a bar counter, the customer can also order a retro counter, in which we install everything else that could not be installed in the bar. It can also be a refrigerated retro counter, with most often a built-in compressor or separate. Boxes with thermopane glass and lighting can be built into the cooled retro counter.

With refrigeration equipment, the emphasis is on completely breaking the thermal bridges, so there are also minimal heat losses. The doors of the refrigerated counters have heated anti-condensation edges, which also prevents the formation of mold on the seals.

Styrodur 40 mm thick is used for insulation, and polyurethane mass is used for cooled superstructures. Cooling drawers are made at the height of a bottle of beer, so that they go in one drawer 32. The guides are telescopic and it is possible to fully pull out the drawer.

On the front of the countertops is raw plywood or panel, and it is recommended that it does not reach the floor. In case of any reason for the facade to get wet, water does not come into contact with the wood. We make a stainless steel plinth from the work side so that rubbish does not remain under the counter, and from the facade side according to the customer's wishes.

We typically use R.F. sheet metal 1 mm thick, but can also be 1.5 mm thick. The temperature range of cooling is +3 to +10 degrees C, and for freezing counters up to -17 degrees C. Drying of condensed water is automatic. We only install digital thermostats with a display.